Öland
Neckring Based on a find from Oland, Sweden 10th Century Specify Neck Size |
Gotland
Neckring Traditional European Design 6th through 12th Century Torc Diameter is approx. 1/4" Sterling Silver ... $495 Specify Neck Size |
|
Bronze
Cush Torc Cush County, Limerick, Ireland Insular Norse 9th - 10th Century Torc Diameter is approx. 5/16" Bronze & Silver Twist with Sterling Cush Terminals ... $195 Specify Neck Size |
Cush
Torc Cush County, Limerick, Ireland Insular Norse 9th - 10th Century Solid Sterling Silver Twist with Bronze Terminals ... $625 Specify Neck Size |
Odin's
Ravens Bronze & Silver Twist Torc Sterling Silver Terminals Terminal is 1 3/4" long Torc Diameter is approx. 1/2" Bird Torc up to 18"... $275 Specify Neck Size NEW |
Chieftain's
Torc
Bronze & Silver Twist
Sterling Silver Terminals
Terminal is 1 1/2" long, 1"
tall
Torc
Diameter is approx. 1/2"
Chieftain's
Torc up to 18"... $245
Specify Neck Size
Urnes
Torc Sterling Silver Viking Beast Finals with Bronze & Silver Twist (Same as Chieftain above) Viking Beast Head is 2 1/4" long Torc Diameter is approx. 1/2" Urnes Torc up to 18"... $275 Specify Neck Size |
|
|
Bronze & Silver Twist w/ Sterling Silver Wolf Finals Wolf Head is 1 1/2" long, 3/4" tall Torc Diameter is approx. 1/2" Wolf Torc up to 18"... $255 Specify Neck Size |
|
Bronze & Silver Twist w/ Sterling Silver Feline Terminals Cat Head is 1 1/4" long, 3/4" tall Torc Diameter is approx.
1/2"
Specify Neck Size |
Sterling Silver Bird Terminals with Bronze & Silver Twist Bird Head is 1 3/4" long, 3/4" tall Torc Diameter is approx.
1/2"
Specify Neck Size |
|
Bronze & Silver Twist w/ Sterling Silver Acorn Terminals Acorn is 3/4" long, 1/2" wide Torc Diameter is approx.
5/16"
Acorn
Torc up to 18"... $195Specify Neck Size |
|
Silver
Urnes Torc |
|
Silver
Chieftain's Torc |
Photos may not reflect actual size.
Neck
Rings & Torcs are worn as loose rings riding on the
collar bone. Torcs with terminals are worn with the
terminals facing forward. Arm Torcs were worn on the upper
arm above the elbow, with the Terminals facing out. Our
Torcs and Neck Rings have some spring to them, which makes
them easier to put on and take off. However, Torcs or Neck
Rings should not be bent back and forth.